Dongqi Low Headroom Electric Hoist Bridge Crane,3T,5T,10T,Used In Low Runway Workshop
ldp single girder overhead crane
Key Specifications/Special Features
- Specifications:
- Capacity: 1 to 16T
- Span: 5 to 35m
- Lifting height: 6 to 50m
- Introduction:
- LDP type low headroom overhead crane, is excellent for low runway workshop
- Hoist runs on top of the beam, gives better lift height than standard single girder crane and provide substantial savings in eliminating the need for both purchase and installation of the crane rail
- Two operational methods: ground or cabin (open or closed type)
- Features:
- Belongs to very low clearance light duty lifting equipment
- Electric hoist is at one side of main girder, so can increase service space of hook and reduce the cost
- With advantages of big trolley tread, smooth traveling, tight structure, strong rigidity, delicate operation, low noise, safety and reliability and beautiful exterior
- Widely used in situation that clearance height of workshop is low
- Operating ambient temperature: -25 to 40°C
- Designed and produced according to GB/T3811-2008, JB/T1306-2008 standard and used with model CD1, MD1
- Light-duty crane with 3 to 15 tons rated load, 7.5 to 22.5m span, A3 to A4 working grade and 6 to 12m lifting height
- Main operation method is ground control (ground control, remote control, ground control + remote control)
- If the span is lifting height is out of range that style book lists, we can do non-standard design according to user requirement
- Note: if your workshop height limit, the LDP type low headroom overhead crane for low runway workshop will be your best choice
